How to Choose a Lift Table
To choose the correct lift table it is necessary to know the kind of work the table is supposed to do.
Lift table technical features
- Capacity
- Platform (A x B)
- Stroke (E)
- Collapsed height (H)
- Hydraulic power pack inside or outside
- Number of cycles per hour
- Number of shifts per day
- Lifting time
- Precision in positioning
Load features
- Weight
- Sizes
- Distribution on the platform
- Type of work
Installation
- Pit installation
- Outdoor
- Indoor
- Explosion risk
- Humidity / Warm / Cold
- Organic / chemical substances
A wide capacity of accessories to meet the safety requirements for lift tables.
Pit
If the lift table is positioned in a pit, it is necessary to provide construction work for placement.
The drawing refers to a standard lift table without options. Please consult Bolzoni Group for correct pit drawing.
A = Top platform length
B = Top platform width
E = Stroke
H = Collapsed height
- Angle iron pit edge protection (60x60x6)
- Rainwater drainage located in the pit centre 100 mm dia.
- Tube for incoming hoses 100 mm dia.
Notes:
- The lower frames of the standard tables are not self-supporting. It is therefore important that the pit base is levelled correctly.
- It is necessary that the bottom of the pit is well drained, the rainwater drainage hole is 80 mm lower than H.
- Output electric / hydraulic cables always from fixed side F-Y.
